Bück, Andreas

2024

• Antunes GGB., Bück A., Mariano FP., Girardi AG., Dos Santos DA.:
  Particle dynamics in a pseudo-2D spouted bed: Experiments and Euler–Lagrange simulations
  In: Chemical Engineering Journal 491 (2024), Article No.: 152007
  ISSN: 1385-8947
  DOI: 10.1016/j.cej.2024.152007
  URL: https://www.sciencedirect.com/science/article/pii/S1385894724034946?via=ihub
• Bhoi S., Kolan SR., Bück A., Tsotsas E.:
  Population balance modeling of formation and breakage of nanoparticle agglomerates in a spouted bed
  In: Powder Technology 433 (2024), Article No.: 119271
  ISSN: 0032-5910
  DOI: 10.1016/j.powtec.2023.119271
• Bück A.:
  Model for structure formation in nanosuspension droplet superheated steam drying
  In: Drying Technology (2024)
  ISSN: 0737-3937
  DOI: 10.1080/07373937.2024.2409799
• Otto E., Ajalova A., Bück A., Tsotsas E., Kienle A.:
  Population Balance Modeling of Particle Size and Porosity in Fluidized Bed Spray Agglomeration
  In: Industrial & Engineering Chemistry Research (2024)
  ISSN: 0888-5885
  DOI: 10.1021/acs.iecr.4c01660
• Otto E., Dürr R., Bück A., Kienle A.:
  Dynamic mode decomposition based MPC of fluidized bed spray agglomeration
  12th IFAC Symposium on Advanced Control of Chemical Processes, ADCHEM 2024 (Toronto, ON, CAN, 14. July 2024 - 17. July 2024)
  In: Martin Monnigmann, Ali Mesbah, Christopher Swartz (ed.): IFAC-PapersOnLine 2024
  DOI: 10.1016/j.ifacol.2024.08.418
• Otto E., Dürr R., Kienle A., Bück A., Tsotsas E.:
  Dynamic modeling of particle size and porosity distribution in fluidized bed spray agglomeration
  In: Flavio Manenti, Gintaras V. Reklaitis (ed.): 34th European Symposium on Computer Aided Process Engineering / 15th International Symposium on Process Systems Engineering, Amsterdam: Elsevier B.V., 2024, p. 163-168 (Computer Aided Chemical Engineering, Vol.53)
  DOI: 10.1016/B978-0-443-28824-1.50028-4
• Peukert W., Bück A.:
  “Green” particle technology: Its history, successes, and open issues
  In: Powder Technology 448 (2024), Article No.: 120255
  ISSN: 0032-5910
  DOI: 10.1016/j.powtec.2024.120255
• Tischer F., Cholewa S., Groppe P., Granath T., Düsenberg B., Mandel K., Drummer D., Bück A., Peukert W., Schmidt J.:
  Magnetic polyamide 11 powder for the powder bed fusion process by liquid-liquid phase separation and crystallization
  In: Additive Manufacturing 88 (2024), Article No.: 104250
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2024.104250
• Tischer F., Düsenberg B., Kaschta J., Bück A., Peukert W., Schmidt J.:
  Poly(butylene terephthalate) for Laser Powder Bed Fusion of Polymers: Feedstock Precipitation and Powder Characterization
  In: ACS Applied Polymer Materials (2024)
  ISSN: 2637-6105
  DOI: 10.1021/acsapm.4c01573

2023

• Düsenberg B., Schmidt J., Sensoy I., Bück A.:
  Flowability of plant based food powders: Almond, chestnut, chickpea, coconut, hazelnut and rice
  In: Journal of Food Engineering 357 (2023), Article No.: 111606
  ISSN: 0260-8774
  DOI: 10.1016/j.jfoodeng.2023.111606
• Düsenberg B., Schmidt J., Singh AK., Bück A.:
  Spray agglomeration of polymer particles: Influence of spray parameters on shape factors
  In: Powder Technology 422 (2023), Article No.: 118491
  ISSN: 0032-5910
  DOI: 10.1016/j.powtec.2023.118491
• Kopp SP., Düsenberg B., Eshun PM., Schmidt J., Bück A., Roth S., Schmidt M.:
  Enabling triboelectric charging as a powder charging method for electrophotographic powder application in laser-based powder bed fusion of polymers by triboelectric charge control
  In: Additive Manufacturing (2023), p. 103531
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2023.103531
• Kushwah P., Das A., Saha J., Bück A.:
  Population balance equation for collisional breakage: A new numerical solution scheme and its convergence
  In: Communications in Nonlinear Science and Numerical Simulation 121 (2023), Article No.: 107244
  ISSN: 1007-5704
  DOI: 10.1016/j.cnsns.2023.107244
• Panduro Vela D., Schlumberger C., Thommes M., Bück A.:
  Spray Printing of Porous Substrates from Nanosuspensions
  In: Processes 11 (2023), Article No.: 1143
  ISSN: 2227-9717
  DOI: 10.3390/pr11041143
• Unger L., Fischer S., Sesseg JP., Pfister A., Schmidt J., Bück A.:
  Control of Particle Properties in Thermally-Induced Precipitation of Polyetherimide
  In: Polymers 15 (2023), Article No.: 1944
  ISSN: 2073-4360
  DOI: 10.3390/polym15081944
• Unger L., Fischer S., Sesseg JPW., Pfister A., Schmidt J., Bück A.:
  Thermal rounding for shape modification of high-performance polyetherketoneketone and reinforced polyetherketoneketone-carbon fiber composite particles
  In: Journal of Polymer Research 30 (2023), Article No.: 213
  ISSN: 1022-9760
  DOI: 10.1007/s10965-023-03600-1
• Wintzheimer S., Luthardt L., Cao KLA., Imaz I., Maspoch D., Ogi T., Bück A., Debecker DP., Faustini M., Mandel K.:
  Multifunctional, Hybrid Materials Design via Spray-Drying: Much more than Just Drying
  In: Advanced Materials 35 (2023), Article No.: 2306648
  ISSN: 0935-9648
  DOI: 10.1002/adma.202306648
  URL: https://onlinelibrary.wiley.com/doi/full/10.1002/adma.202306648
• Wu W., Panduro Vela D., Bück A., Fröba AP.:
  Characterization of nanofluids in evaporating droplets by dynamic light scattering
  In: Measurement 220 (2023), Article No.: 113321
  ISSN: 0263-2241
  DOI: 10.1016/j.measurement.2023.113321

2022

• Du J., Strenzke G., Bück A., Tsotsas E.:
  Monte Carlo modeling of spray agglomeration in a cylindrical fluidized bed: From batch-wise to continuous processes
  In: Powder Technology 396 (2022), p. 113-126
  ISSN: 0032-5910
  DOI: 10.1016/j.powtec.2021.10.051
• Düsenberg B., Esper JD., Maussner F., Mayerhofer M., Schmidt J., Peukert W., Bück A.:
  Control of Crystallization of PBT-PC Blends by Anisotropic SiO2 and GeO2 Glass Flakes
  In: Polymers 14 (2022), Article No.: 4555
  ISSN: 2073-4360
  DOI: 10.3390/polym14214555
• Düsenberg B., Groppe P., Müssig S., Schmidt J., Bück A.:
  Magnetizing Polymer Particles with a Solvent-Free Single Stage Process Using Superparamagnetic Iron Oxide Nanoparticles (SPION)s
  In: Polymers 14 (2022), p. 4178
  ISSN: 2073-4360
  DOI: 10.3390/polym14194178
• Düsenberg B., Kopp SP., Tischer F., Schrüfer S., Roth S., Schmidt J., Schmidt M., Schubert DW., Peukert W., Bück A.:
  Enhancing Photoelectric Powder Deposition of Polymers by Charge Control Substances
  In: Polymers 14 (2022), p. 1332
  ISSN: 2073-4360
  DOI: 10.3390/polym14071332
• Düsenberg B., Tischer F., Seidel AM., Kopp SP., Schmidt J., Roth S., Peukert W., Bück A.:
  Production and analysis of electrically conductive polymer – Carbon-black composites for powder based Additive Manufacturing
  In: Procedia CIRP 111 (2022), p. 18-22
  ISSN: 2212-8271
  DOI: 10.1016/j.procir.2022.08.107
• Düsenberg B., Tischer F., Valayne E., Schmidt J., Peukert W., Bück A.:
  Temperature influence on the triboelectric powder charging during dry coating of polypropylene with nanosilica particles
  In: Powder Technology 399 (2022), Article No.: 117224
  ISSN: 0032-5910
  DOI: 10.1016/j.powtec.2022.117224
• Men J., Kolan SR., Massomi A., Hoffmann T., Schmidt J., Tsotsas E., Bück A.:
  Formulation of Nanostructured Heteroaggregates by Fluidization Technologies
  In: Chemie Ingenieur Technik (2022)
  ISSN: 0009-286X
  DOI: 10.1002/cite.202200139
• Peukert W., Bück A.:
  "Green'' Particle Technology?
  In: Chemie Ingenieur Technik (2022)
  ISSN: 0009-286X
  DOI: 10.1002/cite.202200159
  (anderer)
• Roy N., Dürr R., Bück A., Kumar J., Sundar S.:
  Numerical methods for particle agglomeration and breakage in lid-driven cavity flows at low Reynolds numbers
  In: Mathematics and Computers in Simulation 192 (2022), p. 33-49
  ISSN: 0378-4754
  DOI: 10.1016/j.matcom.2021.08.015
• Seidel C., Dürr R., Bück A.:
  Robust multi-variable control of continuous yeast drying
  In: Journal of Process Control 114 (2022), p. 42-53
  ISSN: 0959-1524
  DOI: 10.1016/j.jprocont.2022.04.004
• Strenzke G., Janocha M., Bück A., Tsotsas E.:
  Morphological descriptors of agglomerates produced in continuously operated spray fluidized beds
  In: Powder Technology 397 (2022), Article No.: 117111
  ISSN: 0032-5910
  DOI: 10.1016/j.powtec.2022.117111
• Unger L., Dechet M., Fischer S., Schmidt J., Bück A.:
  Parameter study for the production of semi-crystalline polyetherimide particles via liquid-liquid phase separation and precipitation
  12th CIRP Conference on Photonic Technologies, LANE 2022 (Erlangen, 4. September 2022 - 8. September 2022)
  In: M. Schmidt, F. Vollertsen, B.M. Colosimo (ed.): Procedia CIRP 2022
  DOI: 10.1016/j.procir.2022.08.059
• Unger L., Dechet M., Fischer S., Schmidt J., Bück A.:
  Semi‐Crystalline Polyetherimide Microparticles via Liquid‐Liquid Phase Separation and Precipitation
  In: Macromolecular Materials and Engineering (2022), p. 2100797
  ISSN: 1438-7492
  DOI: 10.1002/mame.202100797
• Unger L., Gomez Bonilla JS., Dos Santos DA., Bück A.:
  Particle Residence Time Distribution in a Concurrent Multiphase Flow Reactor: Experiments and Euler-Lagrange Simulations
  In: Processes 10 (2022)
  ISSN: 2227-9717
  DOI: 10.3390/pr10050996

2021

• Du J., Chen K., Bück A., Tsotsas E.:
  Stochastic simulation of spray agglomeration process in a continuously operated horizontal fluidized bed by Monte Carlo method
  13th International Conference on Fluidized Bed Technology, CFB 2021 (Vancouver, hosted Online, 10. May 2021 - 14. May 2021)
  URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-85110834465&origin=inward
• Dürr R., Duvigneau S., Seidel C., Kienle A., Bück A.:
  Multi-rate data fusion for state and parameter estimation in (Bio-)chemical process engineering
  In: Processes 9 (2021), Article No.: 1990
  ISSN: 2227-9717
  DOI: 10.3390/pr9111990
• Gomez Bonilla JS., Düsenberg B., Lanyi F., Schmuki P., Schubert DW., Schmidt J., Peukert W., Bück A.:
  Improvement of polymer properties for powder bed fusion by combining in situ PECVD nanoparticle synthesis and dry coating
  In: Plasma Processes and Polymers (2021)
  ISSN: 1612-8850
  DOI: 10.1002/ppap.202000247
• Gómez Bonilla JS., Unger L., Schmidt J., Peukert W., Bück A.:
  Particle Lagrangian CFD Simulation and Experimental Characterization of the Rounding of Polymer Particles in a Downer Reactor with Direct Heating
  In: Processes 9 (2021), Article No.: 916
  ISSN: 2227-9717
  DOI: 10.3390/pr9060916
• Otto E., Dürr R., Strenzke G., Palis S., Bück A., Tsotsas E., Kienle A.:
  Kernel identification in continuous fluidized bed spray agglomeration from steady state data
  In: Advanced Powder Technology (2021)
  ISSN: 0921-8831
  DOI: 10.1016/j.apt.2021.05.028
• Saha J., Bück A.:
  Conservative finite volume schemes for multidimensional fragmentation problems
  In: Mathematics 9 (2021), Article No.: 635
  ISSN: 2227-7390
  DOI: 10.3390/math9060635
• Strenzke G., Dürr R., Bück A., Kienle A., Tsotsas E.:
  Experimental investigation of process behaviour of continuous fluidized bed spray agglomeration with internal classification
  13th International Conference on Fluidized Bed Technology, CFB 2021 (Vancouver, hosted Online, 10. May 2021 - 14. May 2021)
  URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-85110831839&origin=inward

2020

• Bachmann P., Chen K., Bück A., Tsotsas E.:
  Prediction of particle size and layer-thickness distributions in a continuous horizontal fluidized-bed coating process
  In: Particuology 50 (2020), p. 1-12
  ISSN: 1674-2001
  DOI: 10.1016/j.partic.2019.06.005
• Bioucas F., Rausch MH., Schmidt J., Bück A., Koller TM., Fröba AP.:
  Effective Thermal Conductivity of Nanofluids: Measurement and Prediction
  In: International Journal of Thermophysics 41 (2020), Article No.: 55
  ISSN: 0195-928X
  DOI: 10.1007/s10765-020-2621-2
• Canziani H., Chiera S., Schuffenhauer T., Kopp SP., Metzger F., Bück A., Schmidt M., Vogel N.:
  Bottom-Up Design of Composite Supraparticles for Powder-Based Additive Manufacturing
  In: Small (2020), Article No.: 2002076
  ISSN: 1613-6829
  DOI: 10.1002/smll.202002076
• Das A., Bück A., Kumar J.:
  Selection function in breakage processes: PBM and Monte Carlo modeling
  In: Advanced Powder Technology 31 (2020), p. 1457-1469
  ISSN: 0921-8831
  DOI: 10.1016/j.apt.2020.01.002
• Dechet M., Demina A., Römling L., Gomez Bonilla JS., Lanyi F., Schubert DW., Bück A., Peukert W., Schmidt J.:
  Development of poly(L-lactide) (PLLA) microspheres precipitated from triacetin for application in powder bed fusion of polymers
  In: Additive Manufacturing 32 (2020), Article No.: 100966
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2019.100966
• Du J., Bück A., Tsotsas E.:
  Influence of process variables on spray agglomeration process in a continuously operated horizontal fluidized bed
  In: Powder Technology 363 (2020), p. 195-206
  ISSN: 0032-5910
  DOI: 10.1016/j.powtec.2020.01.008
• Duerr R., Bück A.:
  Approximate Moment Methods for Population Balance Equations in Particulate and Bioengineering Processes
  In: Processes 8 (2020)
  ISSN: 2227-9717
  DOI: 10.3390/pr8040414
• Dyrney AdS., Baluni S., Bück A.:
  Eulerian Multiphase Simulation of the Particle Dynamics in a Fluidized Bed Opposed Gas Jet Mill
  In: Processes 8 (2020), Article No.: 1621
  ISSN: 2227-9717
  DOI: 10.3390/pr8121621
• Dürr R., Bück A.:
  Influence of moisture control on activity in continuous fluized bed drying of baker’s yeast pellets
  In: Drying Technology (2020)
  ISSN: 0737-3937
  DOI: 10.1080/07373937.2020.1828449
• Dürr R., Neugebauer C., Palis S., Bück A., Kienle A.:
  Inferential control of product properties for fluidized bed spray granulation layering
  21st IFAC World Congress 2020 (, 12. July 2020 - 17. July 2020)
  DOI: 10.1016/j.ifacol.2020.12.576
• Gomez Bonilla JS., Dechet M., Schmidt J., Peukert W., Bück A.:
  Thermal rounding of micron-sized polymer particles in a downer reactor: direct vs indirect heating
  In: Rapid Prototyping Journal (2020)
  ISSN: 1355-2546
  DOI: 10.1108/RPJ-01-2020-0008
• Gomez Bonilla JS., Szymczak T., Zhou X., Schrüfer S., Dechet M., Schmuki P., Schubert DW., Schmidt J., Peukert W., Bück A.:
  Improving the coloring of polypropylene materials for powder bed fusion by plasma surface functionalization
  In: Additive Manufacturing 34 (2020), Article No.: 101373
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2020.101373
• Jiang Z., Du J., Rieck C., Bück A., Tsotsas E.:
  PTV experiments and DEM simulations of the coefficient of restitution for irregular particles impacting on horizontal substrates
  In: Powder Technology 360 (2020), p. 352-365
  ISSN: 0032-5910
  DOI: 10.1016/j.powtec.2019.10.072
• Jiang Z., Rieck C., Bück A., Tsotsas E.:
  Modeling of inter- and intra-particle coating uniformity in a Wurster fluidized bed by a coupled CFD-DEM-Monte Carlo approach
  In: Chemical Engineering Science 211 (2020), Article No.: 115289
  ISSN: 0009-2509
  DOI: 10.1016/j.ces.2019.115289
• Neugebauer C., Bück A., Kienle A.:
  Control of Particle Size and Porosity in Continuous Fluidized-Bed Layering Granulation Processes
  In: Chemical Engineering & Technology (2020)
  ISSN: 0930-7516
  DOI: 10.1002/ceat.201900435
• Neugebauer C., Diez E., Mielke L., Palis S., Bück A., Tsotsas E., Kienle A., Heinrich S.:
  Dynamics of spray granulation in continuously operated horizontal fluidized beds
  In: Stefan Heinrich (ed.): Dynamic Flowsheet Simulation of Solids Processes, Cham: Springer International Publishing, 2020, p. 67-107
  DOI: 10.1007/978-3-030-45168-4_3
• Rieck C., Bück A., Tsotsas E.:
  Estimation of the dominant size enlargement mechanism in spray fluidized bed processes
  In: Aiche Journal (2020), Article No.: e16920
  ISSN: 0001-1541
  DOI: 10.1002/aic.16920
• Riedel F., Düsenberg B., Schmidt J., Bück A., Peukert W.:
  Production of PBT/PC multi-material particles via a combination of co-grinding and spray-agglomeration for powder bed fusion
  In: Procedia CIRP 94 (2020), p. 100-104
  ISSN: 2212-8271
  DOI: 10.1016/j.procir.2020.09.020
• Saha J., Bück A.:
  Improved accuracy and convergence analysis of finite volume methods for particle fragmentation models
  In: Mathematical Methods in the Applied Sciences (2020)
  ISSN: 0170-4214
  DOI: 10.1002/mma.6890
• Strenzke G., Dürr R., Bück A., Tsotsas E.:
  Influence of operating parameters on process behavior and product quality in continuous spray fluidized bed agglomeration
  In: Powder Technology 375 (2020), p. 210-220
  ISSN: 0032-5910
  DOI: 10.1016/j.powtec.2020.07.083
• Tada ÉFR., Bück A., Tsotsas E., Thoméo JC.:
  Mass transport in a partially filled horizontal drum: Modelling and experiments
  In: Chemical Engineering Science 214 (2020), Article No.: 115448
  ISSN: 0009-2509
  DOI: 10.1016/j.ces.2019.115448
• Zhang L., Jiang Z., Mellmann J., Weigler F., Herz F., Bück A., Tsotsas E.:
  Influence of the number of flights on the dilute phase ratio in flighted rotating drums by PTV measurements and DEM simulations
  In: Particuology (2020)
  ISSN: 1674-2001
  DOI: 10.1016/j.partic.2020.09.010

2019

• Bück A., Metzger T., Schönherr M.:
  The first sixty years of professor Evangelos Tsotsas—or: A quarter-century of combining drying and particle formation
  In: Drying Technology 37 (2019), p. 495-496
  ISSN: 0737-3937
  DOI: 10.1080/07373937.2018.1545784
• Chen K., Bachmann P., Bück A., Jacob M., Tsotsas E.:
  CFD simulation of particle residence time distribution in industrial scale horizontal fluidized bed
  In: Powder Technology 345 (2019), p. 129-139
  ISSN: 0032-5910
  DOI: 10.1016/j.powtec.2018.12.086
• Dechet M., Lanzl L., Werner Y., Drummer D., Bück A., Peukert W., Schmidt J.:
  Manufacturing and Application of PA11-Glass Fiber Composite Particles for Selective Laser Sintering
  30th Annual International Solid Freeform Fabrication Symposium 2019 (Austin, TX)
  In: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium 2019 2019
  URL: http://utw10945.utweb.utexas.edu/sites/default/files/2019/089 Manufacturing and Application of PA11-Glass Fiber.pdf
• Diez E., Kieckhefen P., Meyer K., Bück A., Tsotsas E., Heinrich S.:
  Particle dynamics in a multi-staged fluidized bed: Particle transport behavior on micro-scale by discrete particle modelling
  In: Advanced Powder Technology (2019)
  ISSN: 0921-8831
  DOI: 10.1016/j.apt.2019.05.025
• Duerr R., Seidel C., Neugebauer C., Bück A.:
  Self-tuning control of continuous fluidized bed drying of baker's yeast pellets
  In: Drying Technology 38 (2019), p. 646-654
  ISSN: 0737-3937
  DOI: 10.1080/07373937.2019.1662800
• Gomez Bonilla JS., Kletcher R., Lanyi F., Schubert DW., Bück A., Schmidt J., Peukert W.:
  Effect of particle rounding on the processability of polypropylene powder and the mechanical properties of selective laser sintering produced parts
  30th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2019 (Austin, 12. August 2019 - 14. August 2019)
  URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-85095971435&origin=inward
• Gomez Bonilla JS., Trzenschiok H., Lanyi F., Schubert DW., Bück A., Schmidt J., Peukert W.:
  Tailored modification of flow behavior and processability of polypropylene powders in SLS by fluidized bed coating with in-situ plasma produced silica nanoparticles
  30th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2019 (Austin, 12. August 2019 - 14. August 2019)
  URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-85095963751&origin=inward
• Hesse N., Dechet M., Gomez Bonilla JS., Lübbert C., Roth S., Bück A., Schmidt J., Peukert W.:
  Analysis of tribo-charging during powder spreading in selective laser sintering: Assessment of polyamide 12 powder ageing effects on charging behavior
  In: Polymers 11 (2019), Article No.: 609
  ISSN: 2073-4360
  DOI: 10.3390/polym11040609
• Idakiev VV., Bueck A., Moerl L., Tsotsas E.:
  Inductive heating of fluidized beds: Mobile versus stationary heat exchange elements
  In: Drying Technology 37 (2019), p. 652-663
  ISSN: 0737-3937
  DOI: 10.1080/07373937.2018.1526190
• Marnani AK., Bück A., Antonyuk S., Van Wachem B., Thevenin D., Tomas J.:
  The Effect of the Presence of Very Cohesive Geldart C Ultra-Fine Particles on the Fluidization of Geldart A Fine Particle Beds
  In: Processes 7 (2019), Article No.: 35
  ISSN: 2227-9717
  DOI: 10.3390/pr7010035
• Marnani AK., Bück A., Antonyuk S., van Wachem B., Thévenin D., Tomas J.:
  The effect of very cohesive ultra-fine particles in mixtures on compression, consolidation, and fluidization
  In: Processes 7 (2019), Article No.: 439
  ISSN: 2227-9717
  DOI: 10.3390/pr7070439
• Mielke L., Bück A., Tsotsas E.:
  Multi-stage and multi-compartment model for dynamic simulation of horizontal fluidized bed granulator
  In: Drying Technology (2019)
  ISSN: 0737-3937
  DOI: 10.1080/07373937.2019.1658114
• Mueller D., Bück A., Tsotsas E.:
  Influence of separation properties and processing strategies on product characteristics in continuous fluidized bed spray granulation
  In: Powder Technology 342 (2019), p. 572-584
  ISSN: 0032-5910
  DOI: 10.1016/j.powtec.2018.10.024
• Neugebauer C., Diez E., Bück A., Palis S., Heinrich S., Kienle A.:
  On the dynamics and control of continuous fluidized bed layering granulation with screen-mill-cycle
  In: Powder Technology 354 (2019), p. 765-778
  ISSN: 0032-5910
  DOI: 10.1016/j.powtec.2019.05.030
• Saha J., Das N., Kumar J., Bück A.:
  NUMERICAL SOLUTIONS FOR MULTIDIMENSIONAL FRAGMENTATION PROBLEMS USING FINITE VOLUME METHODS
  In: Kinetic and Related Models 12 (2019)
  ISSN: 1937-5093
  DOI: 10.3934/krm.2019004
• Schmidt J., Dechet M., Gomez Bonilla JS., Bück A., Peukert W.:
  Process Routes towards Novel Polybutylene Terephthalate – Polycarbonate Blend Powders for Selective Laser Sintering
  30th Annual International Solid Freeform Fabrication Symposium 2019 (Austin, TX)
  In: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium 2019 2019
  Open Access: http://utw10945.utweb.utexas.edu/sites/default/files/2019/068 Process Routes towards Novel Polybutylene Terephth.pdf
  URL: http://utw10945.utweb.utexas.edu/sites/default/files/2019/068 Process Routes towards Novel Polybutylene Terephth.pdf
• Schmidt J., Dechet M., Gomez Bonilla JS., Hesse N., Bück A., Peukert W.:
  Characterization of Polymer Powders for Selective Laser Sintering
  30th Annual International Solid Freeform Fabrication Symposium 2019 (Austin, TX)
  In: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium 2019 2019
  Open Access: http://utw10945.utweb.utexas.edu/sites/default/files/2019/066 Characterization of Polymer Powders for Selective.pdf
  URL: http://utw10945.utweb.utexas.edu/sites/default/files/2019/066 Characterization of Polymer Powders for Selective.pdf
• Vorhauer N., Tretau A., Bück A., Prat M.:
  Microwave drying of wet clay with intermittent heating
  In: Drying Technology 37 (2019), p. 664-678
  ISSN: 0737-3937
  DOI: 10.1080/07373937.2018.1547740
• Zarekar S., Bück A., Jacob M., Tsotsas E.:
  Numerical study of the hydrodynamics of fluidized beds operated under sub-atmospheric pressure
  In: Chemical Engineering Journal 372 (2019), p. 1134-1153
  ISSN: 1385-8947
  DOI: 10.1016/j.cej.2019.04.159

2018

• Bück A., Seidel C., Duerr R., Neugebauer C.:
  Robust feedback control of convective drying of particulate solids
  In: Journal of Process Control 69 (2018), p. 86-96
  ISSN: 0959-1524
  DOI: 10.1016/j.jprocont.2018.07.010
• Dechet M., Gomez Bonilla JS., Lanzl L., Drummer D., Bück A., Schmidt J., Peukert W.:
  Spherical Polybutylene Terephtalate (PBT)-Polycarbonate (PC) Blend Particles by Mechanical Alloying and Thermal Rounding
  In: Polymers 10 (2018), Article No.: 1373
  ISSN: 2073-4360
  DOI: 10.3390/polym10121373
• Diez E., Meyer K., Bück A., Tsotsas E., Heinrich S.:
  Influence of process conditions on the product properties in a continuous fluidized bed spray granulation process
  In: Chemical Engineering Research & Design 139 (2018), p. 104-115
  ISSN: 0263-8762
  DOI: 10.1016/j.cherd.2018.09.032
• Du J., Bück A., Tsotsas E.:
  Investigation of spray agglomeration process in continuously operated horizontal fluidized bed
  21st International Drying Symposium (IDS) (Valencia, 11. September 2018 - 14. September 2018)
  In: IDS'2018: 21ST INTERNATIONAL DRYING SYMPOSIUM, VALENCIA: 2018
  DOI: 10.4995/ids2018.2018.7809
• Golovin I., Strenzke G., Duerr R., Palis S., Bück A., Tsotsas E., Kienle A.:
  Parameter identification for continuous fluidized bed spray agglomeration
  In: Processes 6 (2018), Article No.: 246
  ISSN: 2227-9717
  DOI: 10.3390/pr6120246
• Idakiev VV., Steinke C., Sondej F., Bück A., Tsotsas E., Mörl L.:
  Inductive heating of fluidized beds: Spray coating process
  In: Powder Technology 328 (2018), p. 26-37
  ISSN: 0032-5910
  DOI: 10.1016/j.powtec.2018.01.017
• Jiang Z., Hagemeier T., Bück A., Tsotsas E.:
  Color-PTV measurement and CFD-DEM simulation of the dynamics of poly-disperse particle systems in a pseudo-2D fluidized bed
  In: Chemical Engineering Science 179 (2018), p. 115-132
  ISSN: 0009-2509
  DOI: 10.1016/j.ces.2018.01.013
• Jiang Z., Rieck C., Bück A., Tsotsas E.:
  Modeling of Particle Behavior in a Wurster Fluidized Bed: Coupling CFD-DEM with Monte Carlo
  21st International Drying Symposium (IDS) (Valencia, 11. September 2018 - 14. September 2018)
  In: IDS'2018: 21ST INTERNATIONAL DRYING SYMPOSIUM, VALENCIA: 2018
  DOI: 10.4995/ids2018.2018.7219
• Mielke L., Bück A., Tsotsas E.:
  Multi-zone & multi-compartment model for dynamic simulation of horizontal fluidized bed granulator
  21st International Drying Symposium (IDS) (Valencia, 11. September 2018 - 14. September 2018)
  In: IDS'2018: 21ST INTERNATIONAL DRYING SYMPOSIUM, VALENCIA: 2018
  DOI: 10.4995/ids2018.2018.7474
• Mueller D., Bück A., Tsotsas E.:
  Heat and mass transfer modelling of continuous Wurster spray granulation with external product classification
  21st International Drying Symposium (IDS) (Valencia, 11. September 2018 - 14. September 2018)
  In: IDS'2018: 21ST INTERNATIONAL DRYING SYMPOSIUM, VALENCIA: 2018
  DOI: 10.4995/ids2018.2018.7269
• Neugebauer C., Bück A., Palis S., Mielke L., Tsotsas E., Kienle A.:
  Influence of thermal conditions on particle properties in fluidized bed layering granulation
  In: Processes 6 (2018), Article No.: 235
  ISSN: 2227-9717
  DOI: 10.3390/pr6120235
• Rezendes Tada EF., Bück A., Casciatori FP., Thoméo JC.:
  Modelling and simulation of water profiles in a partially filled horizontal drum at low airflow rate
  23rd International Congress of Chemical and Process Engineering, CHISA 2018 and 21st Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, PRES 2018 (Prag, 25. August 2018 - 29. August 2018)
  In: 23rd International Congress of Chemical and Process Engineering (CHISA 2018) and 21st Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2018) 2018
  URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-85084817847&origin=inward
• Rieck C., Schmidt M., Bück A., Tsotsas E.:
  Monte Carlo modeling of binder-Less spray agglomeration in fluidized beds
  In: Aiche Journal 64 (2018), p. 3582-3594
  ISSN: 0001-1541
  DOI: 10.1002/aic.16349
• Seidel C., Neugebauer C., Durr R., Bück A.:
  Robust feedback control of continuously operated convective dryers for particulate materials
  21st International Drying Symposium (IDS) (Valencia, 11. September 2018 - 14. September 2018)
  In: IDS'2018: 21ST INTERNATIONAL DRYING SYMPOSIUM, VALENCIA: 2018
  DOI: 10.4995/ids2018.2018.7245
• Sondej F., Peglow M., Bück A., Tsotsas E.:
  Experimental investigation of the morphology of salt deposits from drying sessile droplets by white-light interferometry
  In: AIChE Journal 64 (2018), p. 2002-2016
  ISSN: 1547-5905
  DOI: 10.1002/aic.16085
• Strenzke G., Golovin ., Wegner M., Palis S., Bück A., Kienle A., Tsotsas E.:
  Influence of drying conditions on process properties and parameter identification for continuous fluidized bed spray agglomeration
  21st International Drying Symposium (IDS) (Valencia, 11. September 2018 - 14. September 2018)
  In: IDS'2018: 21ST INTERNATIONAL DRYING SYMPOSIUM, VALENCIA: 2018
  DOI: 10.4995/ids2018.2018.7319
• Tada EFR., Bück A., Casciatori FP., Thomeo JC.:
  Drying of sugarcane bagasse in a partially filled horizontal drum
  21st International Drying Symposium (IDS) (Valencia, 11. September 2018 - 14. September 2018)
  In: IDS'2018: 21ST INTERNATIONAL DRYING SYMPOSIUM, VALENCIA: 2018
  DOI: 10.4995/ids2018.2018.7827